Dry Mount System

It's incredibly easy with iMARK.

Instructions:

1. Place iMARK dry mount kit (tray with base) on machine.

2. Inspect base for smooth clean surface. If necessary, clean base before using.

3. Lay mounting board on top of clean, dry base.

4. Carefully adhere print to mounting board, keeping most of image covered with release sheet, if possible. Start at one corner and slowly work across entire printed image.

5. Cover print completely with thin material, such as tissue paper, slightly larger than printed image.

6. Turn over mounted, covered print, and place image-side down on base. Cover reverse side completely with unused sheet of iMARK cutting plastic.

7. Push base/tray toward middle of die cutter, until it meets roller. Turn iMARK handle in direction you want the print to go through machine.

8. Remove print, then cover with protective plastic or other material to protect mounted image.

Hints & Tips:

Mounting Board Sources

Contact your Authorized iMARK Dealer, or these companies:

Crescent Cardboard

800-323-1055

www.crescentcardboard.com

Dick Blick

800-723-2787

www.dickblick.com

Kleider Incorporated

800-243-1246

 

Pacific Mount

253-473-2580

 

Pres-On

800-323-1745

www.pres-on.com

Ultra Mounting Boards

877-436-6868

www.mountingboards.com